BMET TTC course list: which of the 55 trades can help with an Australia or NZ job?
Tips · 2026-10-27 · 10 min read

The BMET TTC course list is long: 104 Technical Training Centres, 5 IMTs and BIMT in Narayanganj, teaching 55 trades in courses that run from 3 days to 4 years. For a job in Australia or New Zealand, the best course is one in the same trade as the job you want, followed by real paid work in that trade. A certificate alone rarely gets anyone through; certificate plus provable experience is what employers, skills assessors and visa officers look for.
What is on the BMET TTC course list
BMET (the Bureau of Manpower, Employment and Training) published its updated list of training institutes on 8 July 2026. It has 110 numbered entries: 1 BIMT, 5 IMTs and 104 TTCs, including centres for women. You can find your nearest one on the training institute list on BMET's website.
BMET's citizen charter names the trades. Among the 55 are welding and fabrication, TIG and MIG welding up to the 6G position, carpentry, plumbing and pipe fitting, rod binding, tiles fixing, masonry, electrical house wiring, auto mechanics, refrigeration and air conditioning, computer operation and catering. The full charter is on BMET's website.
BMET's safe-migration checklist tells workers to train at their nearest TTC before going abroad, and its Overseas Employment Platform lists TTC or IMT training right after BMET registration.
Short course or long course: what the difference means abroad
A 3-day course and a 4-year course sit on the same list but do very different jobs. Neither one, on its own, is the same as paid work in the trade.
Already trained at a TTC or holding a technical board paper? Read how NSDA and BTEB certificates count for an Australia job before you attest anything.
That gap matters because the main work visas measure experience, not attendance. Australia's Skills in Demand (subclass 482) visa asks for at least 1 year of relevant work experience in the nominated occupation or a related field, gained in the last 5 years. Part-time or casual work counts if it adds up to at least 12 months of full-time work. The rule is set out on the Home Affairs Core Skills stream page.
New Zealand's Accredited Employer Work Visa (AEWV) sets its own bar: 2 years or more of relevant job experience, or a qualification at level 4 or higher on the New Zealand Qualifications and Credentials Framework, in the same field as the job. Whether a Bangladeshi certificate sits at that level is decided by New Zealand, not by the training centre.
| Type of TTC training | What it gives you | Where it helps for Australia or NZ |
|---|---|---|
| Long trade course (welding, electrical, plumbing, auto mechanics) | A trade base and a certificate | A starting point; it still needs paid work in the trade before most employers or visas will count you |
| Short skills course | One skill, such as a welding position | Useful on a CV next to experience; weak on its own |
| City & Guilds curriculum course | Training to a UK awarding body's curriculum | Familiar to some employers; still assessed again abroad |
| English language course | Practice for daily and work English | Preparation for an English test; the course itself is not the test |
City & Guilds at six TTCs
Six TTCs train to the curriculum of City & Guilds, a UK-based international awarding body: BG TTC Dhaka, BK TTC Dhaka, Sheikh Fazilatunnesa Mujib Mohila TTC, BK TTC Chattogram, Sylhet TTC and Rangpur TTC. If one is near you and runs your trade, the international curriculum can make your training easier to explain abroad.
Still, no foreign certificate is accepted in Australia just because of its name. Home Affairs only accepts a skills assessment from the relevant assessing authority, and each authority sets its own standards, procedures, timeframes and charges.
Welding courses and the 6G question
Welding is where many Bangladeshi workers start, and BMET's welding courses go as far as TIG and MIG welding in the 6G position. A welder in Khulna who passes it has real, respected skill.
The step from that course to an Australian job is still experience. Employers who sponsor want welders who have done the work for a living, and the 1-year rule for the 482 visa applies to welders like everyone else. If you are weighing up the trade, read our post on Australia's skills gap for Bangladeshi welders and fabricators, then compare a live ad such as this fabricator and welder job in Perth with what your course actually covered. JobFinder's guide to welding and fabrication work in Australia adds the employer's side.
Working on building sites rather than in a workshop? Our guide to construction labourer jobs in Australia and the step up to a trade explains why the same experience rule shapes your plan.
In Australia, the fabrication trade is measured against a national qualification. RPLDirect's page on the Certificate III in Engineering - Fabrication Trade shows the job roles that qualification covers, which helps you see how your TTC training and work history might line up.
Skills assessment: what the TTC certificate cannot replace
Some 482 applicants must pass a skills assessment by Trades Recognition Australia (TRA) or VETASSESS, depending on the occupation, and it must be started before the visa is lodged. The occupation list shows which authority assesses each job.
TRA's Migration Skills Assessment Program is documentary-based: it compares your qualifications and your employment history with Australian standards. A TTC certificate is one of those documents, but employment history sits beside it. TRA also says it does not award Australian qualifications, occupational registrations or licences.
For electricians the bar is higher. TRA's Temporary Skills Shortage program is compulsory for the 482 visa as an Electrician (General) or Electrician (Special Class), with an outcome about 9 weeks after complete evidence is in. If house wiring at a TTC is your plan, read why Australia may suit Bangladeshi electricians and builders to see the whole path, not only the course.
In New Zealand, some trades also need registration. Doing restricted plumbing, gasfitting or drainlaying work there without a current New Zealand licence is illegal, and overseas-trained electrical workers must register with the Electrical Workers Registration Board first.
Language courses: which ones matter for Australia and NZ
TTCs teach Korean, EPS-TOPIK, Cantonese, Arabic, English and Japanese. English is offered at 9 TTCs, so check your nearest centre before you enrol. For Australia and New Zealand, only English is relevant.
A TTC English course is practice, not proof. For the 482 visa, the IELTS minimum is 5.0 in each of listening, reading, writing and speaking, the test must be taken within 3 years before applying, and fully online at-home tests are not accepted. For the AEWV, jobs at skill level 3 to 5 need proof of English, with results no more than 2 years old.
Once your classroom English is steady, timed practice helps. You can use PractiseNow for IELTS and PTE practice between shifts.
Choosing a TTC course with an overseas job in mind
- Start from the job, not the course. Look at live ads first, for example our manufacturing jobs in Australia and New Zealand, and note the trades employers ask for.
- Pick the TTC trade that matches. Use BMET's institute list to find which centre near you, in Rajshahi, Cumilla or Barishal, runs that trade.
- Prefer the longer trade course where you can. It builds the base an assessor expects to see.
- Get paid work in the same trade straight after. At home or in the Gulf, keep reference letters with duties, dates and hours, plus payslips.
- Keep every certificate clean. Your name must match your passport, and certificates going abroad may need BTEB attestation through its online service.
- Add English early. Study while you build experience, so the test is not the last hurdle.
- Check the assessing authority. Read its own guidance for your occupation before you pay for anything.
Already have Gulf or Malaysia years? Our guide to turning your Saudi or Malaysia years into proof covers the paperwork side in detail.
NSDA, BTEB and recognition of prior learning at home
Training at a TTC is not the only way to get a certificate in Bangladesh. The National Skills Development Authority (NSDA), working since February 2019, registers institutes running BNQF level 1 to 6 courses and short skills courses of up to 360 hours. NSDA also certifies people through RPL (recognition of prior learning), which suits workers who learned on the job.
The Bangladesh Technical Education Board (BTEB) runs technical exams and grants diplomas and certificates. Its website links to an online service for attesting the certificates of people going abroad.
New Zealand has a matching idea for on-the-job learners. Our post on how New Zealand may now count a trade learned on the job explains it.
Common mistakes Bangladeshi workers make with TTC courses
- Treating a certificate as a job ticket. A TTC certificate is a start. Employers and visas still look for paid work in the trade.
- Taking a course in a trade you will not work in. A course unrelated to your later jobs adds little to an assessment.
- Paying a dalal for a TTC seat or a ready-made certificate. TTCs are BMET's own centres; a certificate bought from a middleman is worthless and can ruin an application.
- Confusing the pre-departure orientation with skills training. The compulsory 3-day pre-departure training, run by TTCs and DEMOs, is about safe migration, not your trade. See our BMET smart card checklist.
- Taking a language course for the wrong country. Korean, Japanese or Arabic courses are aimed at other destinations; Australia and New Zealand need English.
Frequently asked questions
Where can I find the BMET TTC course list?
BMET publishes its list of training institutes on its website, updated on 8 July 2026, with 104 TTCs, 5 IMTs and BIMT. The trades are listed in BMET's citizen charter. Your nearest TTC or District Employment and Manpower Office can tell you which courses run next.
Will a TTC certificate get me a job in Australia?
Not on its own. The 482 visa asks for at least 1 year of relevant work experience in the last 5 years, and many trades need a skills assessment that looks at your employment history too. A TTC certificate helps most when paid work in the same trade follows it.
Is a City & Guilds TTC course better for going abroad?
Six TTCs teach to the City & Guilds curriculum, a UK awarding body, which some employers abroad may recognise. Australia still assesses skills through its own assessing authorities, so treat it as a strong start rather than a pass.
Does the TTC English course count as an English test?
No. It is useful practice, but Australia accepts results from approved tests such as IELTS or PTE taken at a test centre, not from course certificates. New Zealand also asks for test results for jobs at skill level 3 to 5.
Can I join a TTC after working in the Gulf?
Yes. A course in the same trade you practised abroad strengthens the story your reference letters tell. If you learned your trade on the job, ask about NSDA's RPL certification as well.
Key takeaways
- BMET runs 104 TTCs, 5 IMTs and BIMT, teaching 55 trades in courses from 3 days to 4 years.
- Choose the trade from real job ads, then train in it and work in it.
- For the 482 visa you need at least 1 year of relevant work in the last 5 years; for the AEWV, 2 years or a level 4 qualification.
- City & Guilds courses at six TTCs help, but Australia assesses skills again.
- A TTC English course is practice; the visa needs an approved test result.
#bmet #ttc #ttc training bangladesh #skills training #welding course #city and guilds
Australia migration cost from Bangladesh: what the government recruiter's Tk 41,250 covers
Sub-agent from a recruiting agency in Bangladesh? What the 2023 law means before you pay
Fake Australia job offer on WhatsApp? Seven checks Bangladeshi workers can make before paying